The Karbon-CL4-SP
Karbon-CL4-SP is a special version of the Karbon-CL designed to handle the latest 80-bit 85 MHz cameras. These are the fastest cameras supported by the Camera Link standard and are currently produced by most of the top camera manufacturers. Because the data rate of these cameras is so high, both of the DMA engines on the Karbon-CL4-SP are needed to move this incredible amount of data to the host. This means that the Karbon-CL4-SP can support only one 85 MHz 80-bit camera. This frame grabber was developed in response to OEM demand and to eliminate unnecessary costs, components not used in this configuration have been removed. The most likely user is the OEM customers that deploy products using only one camera (and don't need the flexibility offered by the standard CL4-F model). Of course the "SP" model can still acquire from any base, medium or full CL camera made today.
FlowThru Architecture
For the last 10 years, BitFlow's camera interface products have been built around our revolutionary FlowThru architecture. Comprised of a user-programmable Video Pipeline, a flexible Camera Control Unit, efficient high-speed video FIFOs and a highly-optimized scatter/gather DMA engine, the FlowThru architecture allows the Karbon-CL to control, acquire, reformat and transfer video data directly into the user's application at camera speeds with zero latency or CPU usage. Our FlowThru architecture has been continuously optimized and enhanced to support a wide variety of imaging applications such as document/package processing, semiconductor, continuous web inspection, sequence capture and motion analysis and can easily be adapted to the specific needs of your application.
PCI Express Interface
The Karbon-CL uses a x8 PCI Express bus interface. The PCI Express bus offers huge increases in DMA performance over the PCI bus. However, what is less well known is that the PCI Express bus is always peer to peer. This means the the Karbon-CL does not share the bus with any other devices. In most motherboard architectures, it will talk directly to the PCI chipset that is on the memory bus. This direct connection equates to higher sustained DMA bandwidths regardless of system load. Also, most motherboards support concurrent full DMA speed on all of their PCI Express slots. The board will work in any slot that it fits in. This means not only x16 and x8 slots, but also, as is becoming the trend, x4 and x1 slots that use x16 connectors. Performance will be degraded in x1 and x4 slots, but the board will work fine in applications that don't require maximum data rate.
Camera Control and I/O
Supported by a GUI camera file editing utility (CamEd), the Karbon can acquire fixed or variable size images and features a programmable ROI (Region Of Interest) sub-windowing capability. The board provides a full set of camera control signals (CC1, CC2, CC3, CC4) and sync inputs (LVAL, FVAL, PCLK, trigger and encoder) for each camera connected to the board (up to four cameras can be connected). These signals are completely independent, although there are provision for driving all cameras from a signal set up encoder/trigger signals. There is also a large number of programmable general purpose outputs and inputs that are not tied to the camera's timing. The Karbon-CL board, as with our past interface products, supports not only simple triggering modes but also complicated, application-specific triggering and control interactions with your hardware environment.
KBN-PCE-CL2-D
KBN-PCE-CL2-F
KBN-PCE-CL4-D
KBN-PCE-CL4-F
KBN-PCE-CL4-SP
SDK 5.00 or later required